-
Recent Posts
Equipment Manufacturers
Archives
- November 2021
- October 2021
- September 2021
- August 2021
- July 2021
- June 2021
- May 2021
- April 2021
- March 2021
- February 2021
- January 2021
- December 2020
- November 2020
- October 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- March 2020
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- August 2018
- June 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- May 2017
- April 2017
- March 2017
- February 2017
- January 2017
- December 2016
- November 2016
- October 2016
- August 2016
- July 2016
- June 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014
- July 2014
- June 2014
- April 2014
- February 2014
- January 2014
- December 2013
- November 2013
- October 2013
- September 2013
- August 2013
- July 2013
- May 2013
- February 2013
- January 2013
- December 2012
- November 2012
- September 2012
- August 2012
- May 2012
- April 2012
- March 2012
- October 2011
- September 2011
Categories
-
Category Archives: Building
2021-10-26. Maintenance
After arriving home after my work trip, I returned to the hangar and removed the cowling, and checked the transfer valve. It was not operated by the throttle movement at all. Maybe finally the eureka moment we all waited for. … Continue reading
Posted in Building, Engines
Leave a comment
2021-10-06. Building a RAM Air scoop.
I decided to take the airplane down to modify before I start flying my last 12 hours of testflying. It had become clear that the Turbo was not working as advertised. Lots of data crunching eventually let me to compare … Continue reading
Posted in Building, Engines, Finishing
Leave a comment
2021-10-06. Maintenance and upgrade
As discussed earlier, through my 28,5 hours of flying I have come to the conclusion that the turbo is not working, and needs RAM Air to feed the turbo compressor inlet. So today I started with once more removing the … Continue reading
Posted in Building, Cowling, Engines
Leave a comment
2021-04 Finishing Work
Started off with updating all Garmin Flitecharts, and taking pictures of the lighted fuel quantity indicators, also usable as passenger elbow area mood lighting. Worked a roll servo issue which doesn’t seem to be an issue at all. Ugh.. second … Continue reading
2021-04 Finishing Work
I started today reinstalling the returned transponder then Howard came in and assisted. He then went to work on the fuel quantity lights, which we hoped were just hooked up backwards. We were right and after a little reconnection action, … Continue reading
Posted in Avionics, Building, Cowling, Electrical System, Fuelstrakes
Leave a comment
2021-04 Finishing Work
After a great day flying Buzz the trainer together with Ingrid, I am back at home working on my aircraft. First I picked up my dataplate from the shop. Nice job.. I installed it right away. Yes it is not … Continue reading
Posted in Building, Documents, Engines
Leave a comment
2021-04 Finishing Work
The last little bits.. except today we handled some big important items. First, I put more stickers on my plane, door close position etc. The inspector is apparently big on those. Then Howard came in and he tested the up … Continue reading
Posted in Building, Flight Controls, Landing Gear
Leave a comment
2021-04 Finishing work
Today I spend rerigging the ailerons to get required deflections. It’s at required settings now, except RH down, which is 1/8″ short. I am tempted to leave it as I don’t believe it will be a huge detrimental factor. I … Continue reading
Posted in Building, Documents, Engines, Flight Controls, Landing Gear
Leave a comment
2021-04 Finishing work
Today I renotarized paperwork, and sent it off to the inspector.. fingers crossed all is well now.. The I drove to the engraving shop.. and dropped off my dataplate. It will be ready next week. Good timing, I hope to … Continue reading
Posted in Building, Cowling, Engines, Finishing
Leave a comment
2021-04 Finishing Work
We started today with building the oil cooler airbox. It will fit in front of the intake cooler, and force air through the cooler. We build the walls from fiberglass and baffling material, with L shape aluminum brackets to fit … Continue reading
Posted in Building, Documents, Engines, Finishing, Flight Controls
Leave a comment